Edimax ES-3208 8 Power Switch
Complies with the IEEE 802.3 and IEEE 802.3u standards. Provides Store-and-Forward architecture , Full Wire Speed forwarding and filtering rates, Supports Auto-MDI/MDI-X, full/half duplex modes and auto-negotiation. Supports flow control and Non-blocking architecture
200Mbps Full Duplex Transmission
Edimax ES-3208P is a high speed fast Ethernet switch for home and small business. ES-3208P not only complies with IEEE 802.3/802.3u 10/100Mbps Ethernet standard but also supports full duplex transmission. The full duplex feature can double the network throughput on every port. It is used for high speed server or switch-to-switch connections. The maximum throughput of every port can reach up to 200Mbps .
Supports Wire-speed and Flow Control
The ES-3208P built-in non-blocking and store-and-forward architecture feature your network with full-wire speed connections. It accommodates with flow control for full duplex mode and back pressure for half-duplex mode which ensure reliable data transfer and help to prevent data lost. Use ES-3208P to create a high-speeds network and benefit from it’s ultimate performance and reliability.
Supports Auto-MDI/MDI-X and Auto Sensing
ES-3208P supports PnP (plug and play) installation and auto-MDI/MDI-X function. You can connect ES-3208P with computers or Ethernet devices without any configuration. You also can use either straight-through or cross-over Ethernet cable and combine 10 and 100Mbps devices into ES-3208P. The switch will automatically detect the right cable and speed for your device.
With new generation power saving mode, ES-3208P can reduce power consumption. It is the best solution for home and small business.
NETWORK SETUP DIAGRAM AND RELATED PRODUCTS
An example to setup ES-3208P:
Connect the ES-3208P to your Router or cable/ xDSL modem.
Connect a computers to ES-3208P.
You can also connect Print Server, NAS and IP CAMERA to ES-3208P.